The Arduino Mega 2560 is a microcontroller board based on the ATmega2560. It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started. The Mega 2560 board is compatible with most shields designed for the Uno and the former boards Duemilanove or Diecimila.
The MEGA 2560 is designed for more complex projects. With 54 digital I/O pins, 16 analog inputs and a larger space for your sketch it is the recommended board for 3D printers and robotics projects. This gives your projects plenty of room and opportunities.
1. The mega 2560 R3 Board is 100% compatible with Arduino.
2. Powered via the USB connection or with an external power supply. The power source is selected automatically.
3. The ATmega2560-16au has 256 KB of flash memory for storing code (of which 8 KB is used for the bootloader), 8 KB of SRAM and 4 KB of EEPROM (which can be read and written with the EEPROM library).
4. Comes preburned with a bootloader that allows you to upload new code to it without the use of an external hardware programmer. It communicates using the original STK500 protocol (reference, C header files).
5. This version is optimized in the original version, both to ensure consistent and compatible with the original, but also easy to use.
Microcontroller : |
|
Operating Voltage : |
|
Input Voltage (recommended) : |
|
Digital I/O Pins : |
- 54 (of which 15 provide PWM output)
|
Analog Input Pins : |
|
DC Current per I/O Pin : |
|
DC Current for 3.3V Pin : |
|
Flash Memory : |
- 256 KB of which 8 KB used by bootloader
|
SRAM : |
|
EEPROM : |
|
Clock Speed : |
|
LED_BUILTIN : |
|
Length : |
|
Width : |
|
Weight : |
|