T-shape Extension Board which extends the pins of Raspberry Pi and can be directly plugged into a breadboard. The power and GND pins underneath can be plugged into the power (+) and ground (-) rails on the breadboard. With a power indicator LED, and well-made socket in case of inverse cable connection.
Specifically designed for Raspberry pi 3B, Raspberry pi 2B, Raspberry pi 1B+, Raspberry pi 1A+, Raspberry Pi zero W, Raspberry pi zero. Can break out all those tasty power, GPIO, I2C and SPI pins from the 40-pin header onto a solderless breadboard. Each order comes with a 40 pin ribbon cable and assembled T Type Plus GPIO Expansion Board.
You can plug the 40-pin GPIO cable between the Pi computer and the T Type Plus GPIO expansion board. This GPIO expansion board is in a fancy T-shape, which is not as compact but is a little easier to read the labels
1. : |
- Specifically for expansion of the GPIO for Raspberry Pi 3 2 B/B+
|
2. : |
|
3. : |
- Suitable for project with the Raspberry Pi 2, 3 B/B+
|
4. : |
- NO Soldering is required for the T-shape breakout board
|
5. : |
- GPIO: 40-Pin *1.40Pin & 29cm cable*1
|
Package included : |
- 1) GPIO T-adapter plate x 1 2) 830 holes breadboard x 1 3) 40pin GPIO rainbow cable x 1
|